S82.20-2502-06
1 Lens
2 Cover
3 Screw
A7 Stationary heater control
A7.1 Stationary heater connector
E43 Dome lamp
M14 Front sliding roof motor
| Removal, installation | ||
1 | Switch off ignition and dome lamp | ||
2 | Unclip lens (1) | Press lightly at points marked with arrow. | |
3 | Remove cover (2) and unscrew screw (3) | Without code H86: Unclip cover flap and unscrew screw. | |
4.1 | Remove stationary heater (A7) control and disconnect connector (A7.1) | ||
5 | Unclip dome lamp (E43) toward rear and disconnect connector | ||
6 | Install in opposite order |