Remove/install lamp for vanity mirror

AR82.20-P-5582TX

Remove/install lamp for vanity mirror

15.3.10



Removing



The left front vanity mirror illumination (E14/6), right front vanity mirror illumination (E14/7) and the vanity mirror illumination wiring harness (1) are designed as one piece along with the left and right sun visor hinge (2) and cannot be removed separately.
The left front vanity mirror illumination (E14/6) and right front vanity mirror illumination (E14/7) must always be replaced after removal.

1

Remove headliner (3) and place on vehicle's head restraints

 Do not remove the windshield. Remove headliner (3) only far enough to enable access from above to the left front vanity mirror illumination (E14/6) and right front vanity mirror illumination (E14/7) and the vanity mirror illumination wiring harness (1).

AR68.30-P-4300TY

2

Cut through old vanity mirror illumination wiring harness (1) upstream of the left front vanity mirror illumination (E14/6) and the right front vanity mirror illumination (E14/7) (arrow A)

3

Cut through old vanity mirror illumination wiring harness (1) upstream of the left and right sun visor hinge (2) (arrow B)

4

Unclip and remove left front vanity mirror illumination (E14/6) and the right front vanity mirror illumination (E14/7) from headliner (3)

5

Detach adhesive strips (4) and remove the loose remains of the old vanity mirror illumination wiring harness (1) from the headliner (3)

 Do not remove any existing adhesive strips (5).

6

Unclip and remove left and right sun visor hinges (2) from
the headliner (3)



Install

7

Install new vanity mirror illumination wiring harness (1) into the headliner (3)

AR68.30-P-4305-05TX

Adhesive tape

*BR00.45-Z-1071-02A

8

Install headliner (3)

AR68.30-P-4300TY

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85