Remove protective foil of adhesive seal from additional brake lamp (1).
2
Position shop-made pin (3) as shown, through opening in liftgate (2) below additional brake lamp (1) from inside.
Helper required.
3
Position additional brake lamp (1) precisely on liftgate (2).
The position cannot be changed afterwards. Otherwise, the leak tightness of the adhesive seal cannot be assured.
4
Press on additional brake lamp (1) completely while counterholding outer paneling of liftgate (2) with shop-made pin (3) so that clips (4) can engage correctly.
Carefully counterhold outer paneling of liftgate (2) using shop-made pin. Otherwise the outer paneling may be damaged.
