ar8210s5375ee

Remove/install center high-mounted stop lamp

Typ ar · temat 82.10 · wersja 0100 · 2014-06-06

Dotyczy: MODEL 447.6/7 with CODE W50 (Rear-end door, double-wing, 180 degrees without window) MODEL 447.6/7 with CODE W54 (Hinged rear doors, opening to side wall)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 447 (modele 6**, 7**)

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.41 Lampa tylna — Seria 447 (modele 6**, 7**)

AR82.10-S-5375EE

Remove/install center high-mounted stop lamp

23.05.2014

MODEL

447.6/7

with CODE W50 (Rear-end door, double-wing, 180 degrees without window)

MODEL

447.6/7

with CODE W54 (Hinged rear doors, opening to side wall)

Remove/install center high-mounted stop lamp

S82.10-4604-08

1

Screw

E21/1

Rear-end door center high-mounted brake lamp

2

Electrical connector

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Open both rear-end doors

2

Remove screws/bolts (1) and remove rear-end door center high-mounted brake lamp (E21/1) until electrical connector (2) is accessible

3

Unlock and detach electrical connector (2) and remove rear-end door center high-mounted brake lamp (E21/1)

4

Install in the reverse order

Check

5

Perform function test of rear-end door center high-mounted brake lamp (E21/1)

Powiązane dokumenty