1 | Bracket |
1.1 | Repair bracket |
2 | Bracket |
2.2 | Repair bracket |
3 | Bracket |
3.1 | Repair bracket |
4 | Adjusting bush |
5 | Base |
S82.10-4657-06
Danger ! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Remove left front lamp unit or right front lamp unit | ||
2 | Determine and note height of adjusting bushes (4) | ||
3 | Remove adjusting bushes (4) from left front lamp unit or right front lamp unit | ||
4 | Remove base (5) from bracket (2) | ||
5 | Cut off bracket (1, 2, 3) at the predetermined separating points (arrows A, B, C) | ||
6 | Clean and deburr separating points (arrows A, B, C) on left front lamp unit or right front lamp unit | ||
| Install | ||
7 | Screw adjusting bushes (4) into the repair new brackets (1.1, 3.1) | ||
8 | Attach base (5) to repair bracket (2.2) | ||
9 | Set adjusting bushes (4) to the previously determined height | ||
10 | Position and screw repair bracket (1.1, 2.2, 3.1) to left front lamp unit and right front lamp unit | ||
11 | Install left front lamp unit or right front lamp unit |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8210s4730e
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.