ar8210s1201e

Remove/install bulbs of headlamp unit

Typ ar · temat 82.10 · wersja 0101 · 2015-12-17

Dotyczy: Model 447 except code LG2 (LED Light package) Model 448.7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 447 · Seria 448 (modele 7**)

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.40 Lampa przednia — Seria 447 · Seria 448 (modele 7**)

AR82.10-S-1201E

Remove/install bulbs of headlamp unit

14.12.2015

Model

447

except code LG2 (LED Light package)

Model

448.7

Remove/install bulbs of headlamp unit

S82.10-4591-09

Shown on model 447 except code LW1 (Omission of daytime running lights)

1

Housing cover

E1e1

Left high beam

E2e1

Right high beam

2

Housing cover

E1e2

Left low beam

E2e2

Right low beam

3

Low beam socket

E1e5

Left front turn signal lamp

E2e5

Right front turn signal lamp

4

Turn signal lights socket

E1e7

Left parking light, standing light and daytime running light

E2e7

Right parking light, standing light and daytime running light

E1

Left front lamp unit

E2

Right front lamp unit

Remove/install

1

Switch off exterior lights

2

Switch off ignition and remove transmitter key

3

Open service flap in left front fender liner or in right front fender liner

When removing left low beam (E1e2) or right low beam (E2e2).

4.1

Remove housing cover (2), turn two-filament bulb consisting of left high beam (E1e1) and left parking light, standing light and daytime running light (E1e7) or right high beam (E2e1) and right parking light, standing light and daytime running light (E2e7) approx. 30° counterclockwise and remove

Model 447
except code LG2 (LED Light package)
except code LW1 (Omission of daytime running lamps)
When removing the two-filament bulb consisting of left high beam (E1e1) and left parking light, standing light and daytime running light (E1e7) or right high beam (E2e1) and right parking light, standing light and daytime running light (E2e7).


Do not touch the glass bulb with bare fingers; use a soft cloth free of oil and grease.
Otherwise, the glass bulb will be damaged in operation.

4.2

Remove housing cover (2), turn left high beam (E1e1) or right high beam (E2e1) approx. 30° counterclockwise and remove

Model 447
with code LW1 (Omission of daytime running lamps)
except code LG2 (LED Light package)
Model 448.7
When removing left high beam (E1e1) or right high beam (E2e1).


Do not touch the glass bulb with bare fingers; use a soft cloth free of oil and grease.
Otherwise, the glass bulb will be damaged in operation.

5

Remove housing cover (1), turn low beam socket (3) approx. 30° counterclockwise and remove

When removing left low beam (E1e2) or right low beam (E2e2).

6

Pull left low beam (E1e2) or right low beam (E2e2) out of low beam socket (3)

When removing left low beam (E1e2) or right low beam (E2e2).


Do not touch the glass bulb with bare fingers; use a soft cloth free of oil and grease.
Otherwise, the glass bulb will be damaged in operation.

7

Turn turn signal light socket (4) approx. 30° counterclockwise and remove

8

Remove left front turn signal light (E1e5) or right front turn signal light (E2e5) from turn signal light socket (4)

When removing left front turn signal light (E1e5) or right front turn signal light (E2e5).


Do not touch the glass bulb with bare fingers; use a soft cloth free of oil and grease.
Otherwise, the glass bulb will be damaged in operation.

9

Install in the reverse order

Check

10

Carry out function test of the exterior lights