P82.10-0403-06
1 Cover
2 Diode carrier
3 Reflector
4 Gasket
5 Lens
6 Screws
E21x1 Center high-mounted stop lamp connector
| Removal, installation | ||
1 | Remove cover (1) on center high-mounted stop lamp (E21) | ||
2 | Unclip diode carrier (2) from reflector (3) | ||
3 | Unclip connector (E21x1) from diode carrier (2) | ||
4 | Unclip retaining tabs on lens (5) from reflector (3) and press out lens (5) | ||
5 | Unscrew screws (6) from reflector and remove reflector (3) | Installation: Check gasket (4) for damage and replace, if necessary. Ensure that gasket is properly seated | |
6 | Reinstall in opposite order |