P82.10-3922-09
1 Cover
2 Spreading clip
3 Trunk lid paneling
4 Latching hook
E19/1 Left license plate lamp
E19/2 Right license plate lamp
5 Trunk lid
6 Electrical connector
7 Trim panel
| Remove/Install | ||
1 | Remove cover (1) | See: | |
Remove/install trunk lid paneling | |||
2 | Remove expansion clips (2) | Installation: Replace damaged spreading clips (2). | |
3 | Remove outer paneling (7) from trunk lid (5) | ||
4 | Fold down trunk lid paneling (3) until the left license plate lamp (E19/1) or the right license plate lamp (E19/2) is accessible from the rear | ||
5 | Unclip catch hook (4) of left license plate lamp (E19/1) or right license plate lamp (E19/2) and pull out of trunk lid (5) until the electrical connector (6) is accessible | ||
6 | Separate electrical connector (6) and remove the left license plate lamp (E19/1) or right license plate lamp (E19/2) | ||
7 | Install in the reverse order |