1 | Clip |
2 | Electrical connector |
3 | Access opening |
4 | Bumper |
E19/1 | Left license plate lamp |
E19/2 | Right license plate lamp |
P82.10-7729-04
| Remove/install | ||
1 | Switch off ignition, remove transmitter key if necessary and place transmitter key outside of KEYLESS-GO transmission range | ||
2 | Press in clips (1) (see arrows) and unclip left license plate lamp (E19/1) or right license plate lamp (E19/2) from bumper (4) | Using a suitable screwdriver, enter the access opening (3) and press clip (1) to the side in the direction of the arrow. | |
3 | Pull left license plate lamp (E19/1) or right license plate lamp (E19/2) out of bumper (4) and disconnect electrical connector (2) | ||
4 | Install in the reverse order |