ar8210p5161h

Remove/install license plate lamps

Typ ar · temat 82.10 · wersja 0104 · 2020-01-29

Dotyczy: Model 240

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 240

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.41 Lampa tylna — Seria 240

AR82.10-P-5161H

Remove/install license plate lamps

10.01.2020

Model

240

Remove/install license plate lamps

1

Trunk lid

2

Handle strip

4

Nuts

E19/1

Left license plate lamp

E19/2

Right license plate lamp

P82.10-3287-06

Remove/install

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove paneling from trunk lid (1)

AR68.30-P-8150H

3

Disconnect electrical couplings of left license plate lamp (E19/1) and right license plate lamp (E19/2)

4

Remove nuts(4)

5

Remove handle strip (2) from trunk lid

6

Release left license plate lamp (E19/1) and right license plate lamp (E19/2) from handle strip (2) at catch tabs (see arrows) and remove toward front

Installation: Catch tabs must engage audibly.

7

Install in the reverse order

Powiązane dokumenty