P82.10-0407-06
1 Handle strip
2 Screws
3 Electrical connectors
E19/1 Left license plate lamp
E19/2 Right license plate lamp
| Removal, installation | ||
1 | Unscrew screws (2) and remove handle strip (1) from trunk lid | ||
2 | Unclip license plate lamps (E19/1 and E19/2) | To unclip insert a flat object, e.g. plastic wedge, between license plate lamp and trunk lid | |
Installation: Check condition of gasket, replace if necessary, ensure that gasket is properly seated | |||
3 | Disconnect electrical connectors (3) | ||
4 | Reinstall in opposite order |