ar8210p5103q

Remove/install fog lamp

Typ ar · temat 82.10 · wersja 0202 · 2007-07-13

Dotyczy: MODEL 209 except CODE (P98) Black Series

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 209

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.40 Lampa przednia — Seria 209


AR82.10-P-5103Q

Remove/install fog lamp

26.6.07

MODEL 209 except CODE (P98) Black Series

Remove/install fog lamp

P82.10-4186-09

1 Bolts

E5/1 Left front fog lamp

E5/2 Right fog lamp

A Front fog lamp up to 16.05.05

B Front fog lamp as of 17.05.05

Modification notes

11.2.04

"Disconnect/connect battery ground line" removed

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove finder liner in front fender

Only remove front fender liner.

AR88.10-P-1300P

2

Detach electrical connector on left fog lamp (E5/1) or electrical connector on right fog lamp (E5/2)

3.1

Remove front engine compartment paneling

Vehicles with gasoline engine

AR61.20-P-1105P

3.2

Remove bottom part of noise encapsulation at front

Vehicles with diesel engine

AR94.30-P-5300P

4

Remove bolts (1)

5

Take out the left fog lamp (E5/1) or right fog lamp (E5/2)

6

Install in the reverse order

7

Adjust left fog lamp (E5/1) and right fog lamp (E5/2)

Check and correct headlamp adjustment

AP82.10-P-8260P

Powiązane dokumenty