ar8210p4915lc

Remove/install taillamp, trunk lid

Typ ar · temat 82.10 · wersja 0100 · 2014-06-11

Dotyczy: MODEL 217

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 217

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.41 Lampa tylna — Seria 217

AR82.10-P-4915LC

Remove/install taillamp, trunk lid

27.05.2014

MODEL

217

Remove/install taillamp, trunk lid

P82.10-7519-09

1

Retaining clip

3

Left taillamp

2

Nuts

4

Right taillamp

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

Remove/install

1

Remove trunk lid cover

AR88.50-P-5000LC

2

Remove retaining clips (1)

3

Unscrew nuts (2)

4

Remove left taillamp (3) or right taillamp (4) until electrical connector is accessible

5

Disconnect electrical connector of left taillamp (3) or right taillamp (4)

6

Remove left taillamp (3) or right taillamp (4)

7

Install in the reverse order

Powiązane dokumenty