ar8210p4656lc

Remove/install LED module for front lamp unit

Typ ar · temat 82.10 · wersja 0200 · 2020-02-24

Dotyczy: Model 217 with code 640 (SAE dynamic LED headlamps, right-hand traffic) with code 641 (Dynamic LED headlamps, left-hand traffic) with code 642 (Dynamic LED headlamps, right-hand traffic)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 217

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.11 Moduł sterujący/ przekaźnik — Seria 217

AR82.10-P-4656LC

Remove/install LED module for front lamp unit

17.02.2020

Model

217

with code 640 (SAE dynamic LED headlamps, right-hand traffic)

with code 641 (Dynamic LED headlamps, left-hand traffic)

with code 642 (Dynamic LED headlamps, right-hand traffic)

Modification notes

11.02.2020

Perform initial startup.

Operation step 7.

Remove/install LED module for front lamp unit

1

Front lamp unit LED module

2

Bolts

E1

Left front lamp unit

E2

Right front lamp unit

P82.10-A151-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove left front lamp unit (E1) and/or right front lamp unit (E2).

AR82.10-P-4730LC

2

Remove screws (2) from front lamp unit LED module (1).

3

Pull out front lamp unit LED module (1) far enough to disconnect the electrical connector.


Do not crush or kink or subject electric lines to tension.
This will result in damage to the electric lines and can impair their function.

Installation: Ensure that the seal on the front lamp unit LED module (1) is seated correctly.

4

Release and disconnect electrical connector from front lamp unit LED module (1) then remove front lamp unit LED module (1).

5

Install in the reverse order.

6

Attach data matrix code adhesive label to left front lamp unit (E1) or right front lamp unit (E2).

When replacing front lamp unit LED module (1).

The Data Matrix code adhesive label is included with the replacement part.

7

Commission front lamp unit LED module (1).

When replacing front lamp unit LED module (1).

AD00.00-P-2000-04B

Note Data Matrix code on the left front lamp unit (E1) or right front lamp unit (E2).

Powiązane dokumenty