ar8210p4656eq

Remove/install LED module for front lamp unit

Typ ar · temat 82.10 · wersja 0100 · 2020-01-31

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 293

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.11 Moduł sterujący/ przekaźnik — Seria 293

AR82.10-P-4656EQ

Remove/install LED module for front lamp unit

27.01.2020

Model

293

Remove/install LED module for front lamp unit

1

Front lamp unit LED module

E1

Left front lamp unit

E2

Right front lamp unit

P82.10-A148-75

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Commission front lamp unit LED module (1).

When replacing front lamp unit LED module (1).

AD00.00-P-2000-06FR

Installation: Note Data Matrix code on the left front lamp unit (E1) or right front lamp unit (E2).

2

Remove left front lamp unit (E1) and/or right front lamp unit (E2).

AR82.10-P-4730LW

3

Remove screws from front lamp unit LED module (1).

4

Pull out front lamp unit LED module (1) far enough until its electrical connector can be disconnected.

Installation: Ensure that the seal on the front lamp unit LED module (1) is seated correctly.

5

Disconnect electrical connector from front lamp unit LED module (1) and remove front lamp unit LED module (1).

6

Install in the reverse order.

7

Attach data matrix code adhesive label to left front lamp unit (E1) or right front lamp unit (E2).

When replacing front lamp unit LED module (1).

The Data Matrix code adhesive label is included with the replacement part.

Powiązane dokumenty