ar8210p2300sc

Removing and installing headlamp for daytime running light

Typ ar · temat 82.10 · wersja 0100 · 2010-08-17

Dotyczy: MODEL 216 as of model year 2011

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.10 Oświetlenie zewnętrzne — Seria 216

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.40 Lampa przednia — Seria 216

AR82.10-P-2300SC

Removing and installing headlamp for daytime running light

19.7.10

MODEL 216 as of model year 2011

Removing and installing headlamp for daytime running light

P82.10-6368-08

1 Screw

E1/3 Left daytime running lamps headlamp

E2/3 Right daytime running lamps headlamp

Remove/install

1.1

Detach front bumper

When removing left daytime running light headlamp (E1/3) or right daytime running light headlamp (E2/3).

AR88.20-P-2000SCS

1.2

Remove front bumper

When removing left daytime running light headlamp (E1/3) and right daytime running light headlamp (E2/3).

AR88.20-P-2000SCS

2

Detach electrical connector from left daytime running light headlamp (E1/3) or right daytime running light headlamp (E2/3)

3

Remove screws/bolts (1) at rear

4

Remove left daytime running light headlamp (E1/3) or right daytime running light headlamp (E2/3) from bumper covering

Installation: Ensure that the left daytime running lights headlamp (E1/3) or right daytime running lights headlamp (E2/3) is seated correctly in bumper.

5

Remove bezel from left daytime running light headlamp (E1/3) or right daytime running light headlamp (E2/3)

Only when replacing left daytime running light headlamp (E1/3) or right daytime running light headlamp (E2/3).

*452589016300

6

Install in the reverse order

Removing and installing headlamp for daytime running light

Snap-release tool

452 589 01 63 00

Powiązane dokumenty