AR82.10-P-2005SM | Removing and installing rear side-marker lamps | 11.11.04 |
MODEL 450.300 /400 with CODE (L27) Canada
P82.10-3972-01
1 Electrical connector
P82.10-3973-04
2 Bolts
3 Rear impact damper
4 Bolts
E6/3 Left rear side-marker lamp
E6/4 Right rear side-marker lamp
| Remove | ||
1 | Remove CBS rear | Pull the CBS rear from the body until the left rear side-marker lamp (E6/3) and the right rear side-marker lamp (E6/4) can be disconnected. | |
2 | Disconnect electrical connector (1) on right and left | Do not damage catch lugs. | |
3 | Remove CBS rear | ||
4 | Unscrew bolts (2) from rear impact absorber (3) at rear fender | Picture A. | |
5 | Unscrew bolts (4) from left rear side-marker lamp (E6/3) and right rear side-marker lamp (E6/4) at rear impact absorber (3) and remove left rear side-marker lamp (E6/3) and right rear side-marker lamp (E6/4) | Picture B. | |
| Install | ||
6 | Insert left rear side marker lamp (E6/3) and right rear side marker lamp (E6/4) into rear impact absorber (3) and screw in the bolts (4) | Picture B. | |
7 | Place rear impact absorber (3) onto rear fender and screw in the bolts (2) | Picture A. | |
Observe tightening sequence of bolts (2), see: | |||
Tightening schematic for impact damper mount | |||
8 | Move the CBS rear to the attachment position. | ||
9 | Connect electrical connector (1) on right and left | ||
10 | Install CBS rear | ||
| Check | ||
11 | Check side marker lamps for proper function |