P82.10-4163-09
1 | Electrical connector | E1 | Left front lamp unit | E2 | Right front lamp unit | ||
2 | Housing cover (high beam, standing light and parking light) | E1e1 | Left high beam | E2e1 | Right high beam | ||
3 | Housing cover (low beam) | E1e2 | Left low beam | E2e2 | Right low beam | ||
4 | Retaining ring | E1e3 | Left standing and parking lamp | E2e3 | Right standing and parking lamp | ||
5 | Lamp base (standing light and parking light) | E1e5 | Left turn signal lamp | E2e5 | Right turn signal lamp | ||
6 | Turn signal light bayonet ring |
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | |
1 | Switch off the ignition and remove the transmitter key from the EIS control unit | ||
2 | Open engine hood and secure against falling down | ||
3 | Turn housing cover (low beam) (3) on left/right front lamp unit (E1/E2) to left and remove | Left/right low beam (E1e2/E2e2). | |
Installation: Ensure that housing cover (low beam) (3) is seated correctly. | |||
4 | Turn electrical coupling (1) on left/right low beam (E1e2/E2e2) to left and remove | ||
5 | Turn retaining ring (4) to left and remove together with left/right low beam (E1e2/E2e2) | Left/right low beam (E1e2/E2e2) can be replaced separately. | |
6 | Turn housing cover (high beam, standing light and parking light) (2) on left/right front lamp unit (E1/E2) to left and remove | Lamp base (standing light and parking light) (5), left/right standing light and parking light (E1e3/E2e3), left/right high beam (E1e1/E2e1). | |
Installation: Ensure that housing cover (high beam, standing light and parking light) (2) is seated correctly. | |||
7 | Loosen screws of socket of left/right high beam (E1e1/E2e1) | Left/right high beam (E1e1/E2e1). | |
8 | Turn electrical connection and socket of left/right high beam (E1e1/E2e1) simultaneously to left and pull out | ||
9 | Pull out lamp base (standing light and parking light) (5) with left/right standing light and parking light (E1e3/E2e3) | Left/right standing light and parking light (E1e3/E2e3). | |
10 | Turn lamp bayonet ring for turn signal light (6) on left/right front lamp unit (E1/E2) to left and pull out with left/right turn signal light (E1e5/E2e5) | Left/right turn signal light (E1e5/E2e5). | |
11 | Remove bulb | Installation: | |
12 | Install in the reverse order | ||
13 | Perform function test |
Powiązane dokumenty
- ar8840p1000q
- as0000z003501a Zagrożenie życia podczas prac przy elementach i systemach U >=30 V napięcie zmienne (AC) bądź U >=60 V napięcie zmienne
- as8210z000101a Niebezpieczeństwo wybuchu/pożaru wskutek łatwopalnych materiałów w obszarze uszkodzonych lamp ksenonowych. Niebezpieczeństwo obrażeń wskutek światła UV, gorących elementów przy reflektorach ksenonowych i odłamków szkła w prz