AR82.10-P-1201E | Removing and installing bulbs of headlamp unit | 8.6.98 |
MODEL 129 up to 30.5.98 with CODE (491) USA version
P82.10-2132-06
1 Housing cover
2 Electrical connector
3 Mounting ring
4 Bulb
5 Sealing ring
Operation no. of operation texts or of standard texts and flat rates
Operation no. | Operation text |
| Removal, installation | ||
1 | Open engine hood. Move to upright position | ||
2.1 | Remove windshield washer water reservoir | Only required for right headlamp unit. | |
3 | Remove housing cover (1) | ||
4 | Disconnect electrical connector (2) from bulb (4) | ||
5 | Remove mounting ring (3) | ||
6 | Remove bulb (4) | Do not touch bulbs with bare fingers. Use soft, grease-free rag. Observe correct installation position. | |
Check sealing ring (5) for damage and wear, replace if required. | |||
7 | Install in opposite order | ||
8 | Check function |