AR82.10-P-0005TX | Remove/install rear axle level sensor | 23.12.04 |
MODELS 219.3 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination
P82.10-4033-06
1 Nut
2 Bolts
3 Electrical connector
B22/3 Rear axle levelsensor
| Remove/Install | ||
1 | Raise vehicle with lifting platform | ||
2 | Unscrew nut (1) | Replace self-locking nut (1). | |
3 | Unscrew bolts (2) | ||
4 | Disconnect electrical connector (3) and remove rear axle level sensor (B22/3) | ||
5 | Install in the reverse order | ||
6 | Check the adjustment of the left front lamp unit and the right front lamp unit, correct if necessary. | ||
| Check and correct headlamp setting |
Powiązane dokumenty
- ap8210p8260tx Kontrola i regulacja ustawienia reflektorów
- ar0060p1000tx