Remove/install rear axle level sensor

AR82.10-P-0005MFA

Remove/install rear axle level sensor

07.03.2019

Model

118, 177, 247

with code 459 (Steel suspension with adjustable damping)

Model

118, 177, 247

with code 631 (Static LED headlamps, left-hand traffic)

Model

118, 177, 247

with code 632 (Headlamps, LED, static, right-side traffic)

Model

118, 177, 247

with code 640 (SAE dynamic LED headlamps, right-hand traffic)

Model

118, 177, 247

with code 641 (Dynamic LED headlamps, left-hand traffic)

Model

118, 177, 247

with code 642 (Dynamic LED headlamps, right-hand traffic)

Shown on vehicle with code U54 (Torsion-beam axle)

1

Nut

2

Bolts

B22/7

Left rear level sensor

B22/10

Right rear level sensor

Shown on vehicle with code 459 (Steel suspension with adjustable damping)

1

Nut

2

Bolts

B22/7

Left rear level sensor

B22/10

Right rear level sensor

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Lift vehicle with lifting platform.

AR00.60-P-1006A

3

Release and disconnect electrical connector at left rear level sensor (B22/7) or right rear level sensor (B22/10).

 The number of level sensors per axle varies depending on the vehicle equipment.

4

Unscrew nut (1).

 Installation: Pay attention to installation position.

 Installation: Do not twist left rear level sensor (B22/7) or right rear level sensor (B22/10).

 Nut, turning angle sensor to connecting strut

*BA82.10-P-1002-02G

5

Unscrew bolts (2).

 Screw/bolt, turning angle sensor to bracket

*BA82.10-P-1001-02G

6

Remove left rear level sensor (B22/7) or right rear level sensor (B22/10).

7

Install in the reverse order.

Calibrate

8

Calibrate left rear level sensor (B22/7) or right rear level sensor (B22/10) using vehicle diagnosis system.

After replacing the left rear level sensor (B22/7) or right rear level sensor (B22/10).



AD00.00-P-2000-06MFA



Check

9

Check and correct headlamp adjustment.

After replacing the left rear level sensor (B22/7) or right rear level sensor (B22/10).



Model 247
with code 459 (Steel suspension with adjustable damping)
with code 631 (Static LED headlamps, left-hand traffic)
with code 632 (Headlamps, LED, static, right-side traffic)
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
with code 641 (Dynamic LED headlamps, left-hand traffic)
with code 642 (Dynamic LED headlamps, right-hand traffic)

AP82.10-P-8260AO



Model 177
with code 459 (Steel suspension with adjustable damping)
with code 631 (Static LED headlamps, left-hand traffic)
with code 632 (Headlamps, LED, static, right-side traffic)
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
with code 641 (Dynamic LED headlamps, left-hand traffic)
with code 642 (Dynamic LED headlamps, right-hand traffic)

AP82.10-P-8260N



Model 118
with code 459 (Steel suspension with adjustable damping)
with code 631 (Static LED headlamps, left-hand traffic)
with code 632 (Headlamps, LED, static, right-side traffic)
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
with code 641 (Dynamic LED headlamps, left-hand traffic)
with code 642 (Dynamic LED headlamps, right-hand traffic)

AP82.10-P-8260Y

 Rear axle level sensor

Number

Designation

Model 118

Model 177

BA82.10-P-1001-02G

Screw/bolt, turning angle sensor to bracket

M5

Nm

5

5

 Rear axle level sensor

Number

Designation

Model 247

BA82.10-P-1001-02G

Screw/bolt, turning angle sensor to bracket

M5

Nm

5

 Rear axle level sensor

Number

Designation

Model 118

Model 177

BA82.10-P-1002-02G

Nut, turning angle sensor to connecting strut

M6

Nm

8

8

 Rear axle level sensor

Number

Designation

Model 247

BA82.10-P-1002-02G

Nut, turning angle sensor to connecting strut

M6

Nm

8