1 | Locking arm |
2 | Retaining clip |
3 | Locking arm |
4 | Retaining clip |
5 | Front fog lamp bulb |
6 | Housing cover |
7 | Low beam bulb |
8 | Side light bulb |
9 | High beam bulb |
10 | Retaining clip |
11 | Turn signal bulb with holder |
D82.10-0001-05
| Remove/install | ||
1 | Open engine hood | ||
2 | Open locking arm (1, 3) at rear of headlamp unit and take off housing cover (6) | ||
3 | Open retaining clip (2), remove low beam bulb (7) and disconnect electrical connection | Only if necessary. | |
4 | Remove socket, remove standing light bulb (8) from seat | Only if necessary. | |
5 | Open retaining clip (4), remove front fog lamp bulb (5) and disconnect electrical connection | Only if necessary. | |
6 | Open retaining clip (10), remove high beam bulb (9) and disconnect electrical connection | Only if necessary. | |
7 | Install in the reverse order |