AR80.50-S-0004A | Removing, installing ATA engine hood switch | 5.10.98 |
MODEL 638.0 /1 /2
with CODE (FZ4) Anti-theft alarm with interior motion sensor
with CODE (FZ5) Anti-theft alarm
S80.50-2517-06
1 Engine hood lock
2 Electrical lead
3 Connector compartment
S18 Anti-theft alarm system engine hood contact switch
S18.1 Connector
| Removal | ||
1 | Deactivate ATA | See operating instructions | |
2 | Remove engine hood lock (1) | ||
3 | Unclip contact switch (S18) (arrow) | To remove disconnect electrical lead (2) directly from contact switch (S18)! | |
4 | Disconnect connector (S18.1) | In connector compartment (3). | |
| Installation | ||
5 | Install contact switch (S18) | Remove contact pins from connector for switch to be installed and connect to cable end of disconnected electric lead. | |
6 | Pull in electric lead for switch to be installed | After pulling in the lead insert contact pins into connector. | |
7 | Install in opposite order | Steps 4 - 1 |