AR80.50-P-1000SM | Remove/install interior motion sensor | 11.9.02 |
MODEL 450.3 /with CODE (V02) alarm system (relevant for service)
P80.50-2310-09
1 Electrical connector
2 Electrical connector
B39/6 Right front ultrasonic sensor anti-theft alarm system
N46 IR interior motion sensor control
module
3 Electrical connector
B39/5 Left front ultrasonic sensor anti-theft alarm system
| Remove/Install | ||
1 | Remove footwell cover on driver side | ||
2 | Remove footwell cover on front passenger side | ||
3 | Remove foot support on passenger side | ||
4 | Disconnect electrical connector (1). | ||
5 | Unscrew nuts at the bottom of the firewall and remove IR interior motion sensor control module (N46) | ||
6 | Disconnect electrical connector (2) and unclip right front ultrasonic sensor anti-theft alarm system (B39/6) from A-pillar below the instrument panel and remove right front ultrasonic sensor anti-theft alarm system (B39/6) | ||
7 | Disconnect electrical connector (3) and unclip left front ultrasonic sensor anti-theft alarm system (B39/5) from A-pillar below the instrument panel and remove. | Installation: The left front ultrasonic sensor anti-theft alarm system (B39/5) is marked with a red band. | |
8 | Install in the reverse order |