1 | Nut |
2 | Electrical connector |
3 | Screw |
4 | Bracket |
A37 | PSE control unit (combined) |
N121 | TLC [HDS] control unit |
P82.85-9746-11
P80.50-2362-07
5 | Electrical connector | 7 | Tab | B33 | ATA [EDW] inclination sensor | ||
6 | Bracket |
| Remove/install | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
1 | Disconnect battery ground line | ||
Topical note | Notes on battery | ||
2 | Remove side paneling in left side of trunk | ||
3 | Unlock and disconnect the electrical connector (2) from the TLC control unit (N121) | ||
4 | Remove nuts (1) | ||
5 | Remove bolts (3) | ||
6 | Swivel the bracket (4) with pneumatic controller unit with multifunctions (A37) to the side | ||
7 | Disconnect the electrical connector (5) from the ATA inclination sensor (B33) | ||
8 | Unlock the shackle (7) of the bracket (6) with a screwdriver and slide the ATA inclination sensor (B33) in the direction of the arrow of the bracket (6) | ||
9 | Install in the reverse order |
Powiązane dokumenty
- ah5410p000101a Wskazówki dotyczące akumulatora
- ah5410p000101a
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar5410p0003h
- ar6830p4800h
- as5410z000101a Niebezpieczeństwo pożaru/wybuchu z powodu zwarcia i wydostającego się gazu piorunującego. Niebezpieczeństwo obrażeń z powodu poparzenia oczu, skóry i śluzówki przez elektrolit akumulatora/mgiełkę lub przez zwarcie i działanie