Shown on model 907.7 with engine 651 |
1 | Alarm siren |
2 | Nut |
3 | Bracket |
4 | Mounting clip |
5 | Electrical connector |
D80.50-1166-76
Warning | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Unscrew nuts (2) and place alarm siren (1) with bracket (3) to one side. | Nut, holder for alarm siren to body | |
3 | Unclip retaining clip (4) and disconnect electrical connector (5). | Installation: If the retaining clip (4) is damaged it must be replaced. | |
Clip remover | |||
4 | Unscrew alarm siren (1) from bracket (3). | If the alarm siren (1) must be replaced. | |
Nut, alarm siren to holder | |||
5 | Install in the reverse order. | ||
| Check | ||
6 | Perform function test of anti-theft alarm system (ATA). |
452 589 01 63 00
Clip remover
Powiązane dokumenty
- ah0000n000101a Wskazówki dotyczące samozabezpieczających śrub i nakrętek
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- as8230z000101a Niebezpieczeństwo zakleszczenia lub zmiażdżenia, w skrajnym przypadku obcięcia kończyn podczas prac przy układzie mechanicznym wycieraczki