AR80.35-P-4500G | Removing, installing radio frequency DAS control module | 6.9.96 |
MODEL 170 as of 1.6.97
MODEL 170
with CODE (491) USA version
with CODE (498) Japanese version
P80.35-0202-04
1 Insulating mat
2 2-pin CAN connector
3 2-pin connector for transponder coil
4 18-pin connector
5 Base plate
N54/3 Radio frequency DAS control module
| Removal, installation | ||
1 | Remove upper section of instrument panel | ||
2 | Fold insulating mat (1) in area of instrument cluster back toward front | ||
3 | Disconnect 2-pin CAN connector (2) | ||
4 | Disconnect 2-pin connector for transponder coil (3) | ||
5 | Disconnect 18-pin connector (4) | Aid for connecting and disconnecting | |
6 | Press retaining tabs (arrows) apart | ||
7 | Remove radio frequency DAS control module (N54/3) from base plate (5) | When replacing the control module or remote control key always specify the lock number and chassis number, because the two parts are matched to one another. Installation: Insert rear retaining tab on radio frequency DAS control module (N54/3) in base plate (5). After replacing radio frequency DAS control module (N54/3) perform version coding according to Diagnosis Manual, Body. | |
8 | Reinstall in opposite order |