AR80.35-P-4500CA | Removing, installing radio frequency DAS control module | 13.12.96 |
MODEL 140 as of 1.6.97
P80.35-0222-01
1 2-pin CAN connector
2 2-pin connector for transponder coil
3 18-pin connector
4 Base plate
N54/3 Radio frequency DAS control module
W1 Main ground (behind instrument cluster)
Illustrated on model 210
| Removal, installation | ||
1 | Remove instrument cluster | ||
2 | Disconnect 2-pin CAN connector (1) | ||
3 | Disconnect 2-pin connector for transponder coil (2) | ||
4 | Disconnect 18-pin connector | ||
Press retaining lugs (arrows) apart | |||
Remove radio frequency DAS control module (N54/3) from base plate (4) | When replacing control module or remote control key always indicate lock number, because the two parts are matched to one another. After replacing the radio frequency DAS control module (N54/3) perform version coding according to diagnosis manual Installation: When installing insert rear retaining lug on radio frequency DAS control module (N54/3) into base plate (4) | ||
Reinstall in opposite order |