Remove/install Keyless Go control unit

AR80.35-P-0001HA

Remove/install Keyless Go control unit

09.01.2020

Model

240

with code 889 (KEYLESS-GO)

Interior module KEYLESS-GO control unit

1

Electrical connector

N103

Interior module KEYLESS-GO control unit

 

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove center console

Model 240.0

AR68.20-P-2000H

Model 240.1 with partition wall code 215, partition wall with clear glass code 302 or partition wall with clear glass and curtain code 303.

AR68.20-P-2000HA

Model 240.1 apart from partition wall code 215, partition wall with clear glass code 302 or partition wall with clear glass and curtain code 303.

AR68.20-P-2000HB

3

Disconnect the electrical connector (1) from the control unit of the Keyless-Go interior module (N103)

4

Remove the control unit of the Keyless-Go interior module (N103) upwards out of the recess of the soundproofing

5

Install in the reverse order