ar8030s4511a

Removing and installing the radio-communication remote control receiver

Typ ar · temat 80.30 · wersja 0100 · 1997-04-25

Dotyczy: MODEL 638 with CODE (FZ1) Central locking with remote control with CODE (FZ3) Comfort lock system with remote control

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 80 Zamek centralny, sterowanie komfortowe, układ uprawniający do jazdy › 80.30 Pilot na podczerwień — Seria 638

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.16 Blokowanie/ odblokowanie › 29.16.14 Nadajnik/ odbiornik — Seria 638

AR80.30-S-4511A

Removing and installing the radio-communication remote control receiver

18.4.96

MODEL 638
with CODE (FZ1) Central locking with remote control
with CODE (FZ3) Comfort lock system with remote control

Removing and installing the radio-communication remote control receiver

S80.30-2002-09

1 Receiver

2 Lining

A25 Radio-communication remote control control device

A25.1 Coupling

Pin 1 Connection for receiver

Removing and installing

1

Remove the lining (2)

2

Withdraw the receiver (1) from the instrument panel

3

Remove the coupling (A25.1) from the radio-communication remote control device (A25)

4

Remove the cable-holder band from the set of cables

Installation: Replace the cable-holder band

5

Cut the insulation of the receiver (1) set of cables

Pay attention not to damage the electrical cables.
Installation: insulate the set of cables

6

Disconnect the receiver (1) in Pin 1 of coupling (A25.1)

7

The installation is carried out in reverse order