ar8030p4305h

Remove/install front door infrared remote control receiver

Typ ar · temat 80.30 · wersja 0104 · 2020-01-30

Dotyczy: Model 240

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 80 Zamek centralny, sterowanie komfortowe, układ uprawniający do jazdy › 80.30 Pilot na podczerwień — Seria 240

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.16 Blokowanie/ odblokowanie › 29.16.14 Nadajnik/ odbiornik — Seria 240

AR80.30-P-4305H

Remove/install front door infrared remote control receiver

10.01.2020

Model

240

Remove/install front door infrared remote control receiver

P80.30-2186-07

1

Internal Torx screwdriver

4

Lock cylinder guide

7

Lock cylinder

2

Rubber door seal

5

Electrical connector

A26/1

Left front IR receiver

3

Door lock

6

Door handle

A26/2

Right front IR receiver

Remove/install

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Release rubber door seal (2) above door lock (3)

3

Release Torx screw with internal Torx screwdriver (1) by five revolutions

Screw/bolt, door handle of front door

*BA72.10-P-1007-01E

4

Remove lock cylinder guide (4) with IR receiver unit, front left (A26/1), right (A26/2) from door

Until electrical connector (5) can be accessed; in this connection, pull door handle (6) and move lock cylinder with vehicle key to horizontal position.

5

Disconnect electrical connection (5)

6

Turn lock cylinder (7) counterclockwise and remove IR receiver unit, front left (A26/1), right (A26/2) from lock cylinder guide (4)

7

Install in the reverse order

8

Check closing system for proper function

Front door

Number

Designation

Model 240

BA72.10-P-1007-01E

Screw/bolt, door handle of front door

Nm

3

Powiązane dokumenty