Adjust electric pop-up roof in lateral axis

AR77.75-S-0001-04E

Adjust electric pop-up roof in lateral axis

Model

447.8

with code ZK0 (EASY UP pop-up roof, electric)

 Electric pop-up roof

Number

Designation

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

BA77.75-N-1002-01D

Bolt, front roof rail to pop-up roof

Nm

10

 Electric pop-up roof

Number

Designation

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)

BA77.75-N-1004-01D

Nut, rear support clamp to pop-up roof

Nm

10

1

Detach nuts (3) on both rear set-up braces (2).

2

Adjust front edge of pop-up roof (1) by adjusting both roof rails on front set-up brace (2) along lateral axis (z) to roof.

 The two rear set-up braces (2) should be positioned parallel to one another.

3

Tighten nuts (3) on the two rear set-up braces (2)  .

Shown on left side of vehicle

4

Loosen bolts (4) on both roof rails front set-up brace (5).

5

Adjust front edge of pop-up roof (1) by adjusting both roof rails on front set-up brace (5) along lateral axis (z) to roof.

 The roof rails must be positioned parallel to one another.

6

Tighten bolts (4) on both roof frails on front set-up brace (5)  .

Shown on front left side of vehicle

7

Completely close pop-up roof (1).

8

Ensure that pop-up roof (1) is centered in relation to the vehicle roof (6).

 The joint width must be equal (arrows) over the entire length of the pop-up roof (1) on both sides of the vehicle.