AR77.50-P-1000-01C | Cutting out roof panel with cutting blade | ||
Danger! | Risk of injury from blade slipping off when clamping it in the multicutter and from glass splinters when cutting out glued windows | Clamp/unclamp blade only with air supply shut off. Wear protective gloves and goggles |
124 589 21 63 00
Cutting blade
Cutting blade
124 589 12 63 00
Commercially available tools
P77.50-2002-01
1 Clamp blade (124 589 12 63 00) in multicutter (adjust stop on cutting blade
to 15 mm).
2 Moisten whetstone and sharpen blade on both sides with machine switched on.
3 Insert cutting blade in area "A" and cut out window from inside along contour "A".
4 Clamp blade (124 589 21 63 00) in multicutter.
5 Moisten whetstone and sharpen blade on both sides with machine switched on.
6 Insert cutting blade in area "B" and cut out window from inside along contour "B".
P77.50-2003-01
7 Turn over glass roof.
8 Insert cutting blade in area "C" and cut out window from outside along contour "C".
If the glue cannot be cut through completely with the available cutting blades, use cutting wire.
Powiązane dokumenty
- as6700z000101a Niebezpieczeństwo obrażeń wskutek ześlizgnięcia się noża podczas mocowania w wielofunkcyjnym przyrządzie do cięcia i przez odpryski szkła podczas wycinania wklejanych szyb.