Removing and installing roof railing

AR77.40-P-5000ME

Removing and installing roof railing

12.04.2019

Model

167.1/9

Shown on the right side of the vehicle on model 167.1 with code 413 (panoramic sliding sunroof) and code U40 (safety net for luggage compartment cover)

1

Screw

3

Nuts

2

Rear luggage net bracket

4

Nut

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove roof lining and set down on suitable base.

AR68.30-P-4300ME

2

Remove screws (1) and remove rear luggage net bracket (2).

Model 167.1
with code U40 (Safety net for luggage cover)

 Screw, mounting support for luggage net to C-pillar

*BA68.30-P-1001-01G

3

Remove nuts (3).

 Nut, roof railing

*BA77.40-P-1001-01C

4

Remove nut (4) and remove roof railing.


The roof railing must be held by a helper and carefully removed.
Otherwise the paint can be damaged.

 Installation: Replace seals at bolts.

 Nut, roof railing

*BA77.40-P-1001-01C

5

Install in the reverse order.

 Paneling, trim frame

Number

Designation

Model 167

BA68.30-P-1001-01G

Screw, mounting support for luggage net to C-pillar

Nm

8

 Roof railing

Number

Designation

Model 167

BA77.40-P-1001-01C

Nut, roof railing

Nm

25