ar7739p3605r

Remove/install roll bar (RB)/soft top operation control unit

Typ ar · temat 77.39 · wersja 0106 · 2008-11-21

Dotyczy: MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.39 Układ elektryczny składanego dachu Vario — Seria 230 (modele 4**)

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.15 System ochrony pasażerów › 27.15.11 Moduł sterujący/ przekaźnik — Seria 230 (modele 4**)

EinPAS 38 System dachu › 38.20 Dach składany/Vario/coupé › 38.20.11 Moduł sterujący/ przekaźnik — Seria 230 (modele 4**)

AR77.39-P-3605R

Remove/install roll bar (RB)/soft top operation control unit

30.10.08

MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Remove/install roll bar (RB)/soft top operation control unit

P77.39-2063-06

1 Bracket

1.1 Bracket upper section

2 Electrical connectors

3 Electrical connector

A60 Vehicle-sensitive seatbelt lock sensor

B24/15 Turn rate and lateral acceleration sensor

K40/5 Rear fuse and relay module

N10/8 Rear SAM control unit

N52 RSC [UVS] control unit

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove rear SAM control unit (N10/8) with rear fuse and relay module (K40/5)

AR54.21-P-1259R

2

Remove vehicle-sensitive seatbelt lock sensor (A60)

AR91.40-P-1355R

3

Remove RVC [UVS] control unit (N52) with bracket (1) and raise until electrical connectors (2) are accessible.

4

Disconnect electrical connectors (2) from RVC [UVS] control unit (N52)

5

Disconnect electrical connector (3) from yaw rate and lateral acceleration sensor (B24/15)

6

Remove RVC [UVS] control unit (N52) with bracket (1)

7

Remove bracket upper section (1.1) and remove RVC [UVS] control unit (N52)

8

Install in the reverse order

9

Read out fault memory, erase if necessary

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Powiązane dokumenty