P77.33-0234-06
1 Control cable
2 Clip
3 Holder for control cable on Vario-roof
4 Control cable eye
5 Holder for control cable on C-pillar
6 Slider
| Disassembly | ||
1 | Remove paneling at front of Vario-roof | ||
2 | Remove C-pillar paneling at Vario-roof | ||
3 | Move Vario-roof to 90° position with roof switch | ||
4 | Check adjustment of control cable (1) | Distance between eye (4) and holder (5): 1-2 mm | |
Adjusting | |||
5 | Pull clip (2) off of holder (3) | ||
6 | Adjust control cable (1) in direction of arrow until distance between eye (4) and holder (5) is reached and reattach clip (2) | ||
7 | Actuate Vario-roof a number of times with the roof switch | Check distance between eye (4) and holder (5), if necessary | |
correct adjustment of control cable (1) If the eye (4) is in contact with the holder (5), the control cable can be damaged when the roof is actuated | |||
| Assembly | ||
8 | Install C-pillar paneling at Vario-roof | ||
9 | Install paneling at front of Vario-roof | ||
10 | Install paneling at front side of Vario-roof |