Do not engage roof cassette (3) at catch hooks of four-point linkage.
2
Remove side supports
3
Pull off side wall seal (1) starting in marked area (arrow A)
Install
4
First insert guide of side wall seal (1) into cutout (arrow B) at B-pillar (2), then manually press side wall seal (1) onto body flange and readjust with a plastic mallet if necessary
The side wall seal (1) must be inserted in the radii so that as closely in contact as possible, as otherwise leaks can occur. The right and left side wall seal (1) must meet without gap in the center of the rear end panel (arrow C). The lip of the side wall seal (1) must contact the body without any contortions.
