Remove/install soft top

AR77.30-P-1002RR

12.04.2019

Model	452.3/4
	with code E27 (Softtop (FFO))

P77.30-2259-06

P77.30-2260-04

P77.30-2261-01

	Remove
	Notes on soft tops		AH77.30-P-0001-01MCO
1	Remove screw/bolt (1)	 Lift carpet (4). The soft top must be closed.
2	Detach seat belt from seat belt guide at seat
3	Remove cover at seat belt guide bracket (14) and remove mounting screw (13)	 Bolt, upper seat belt guide bracket	*BA91.40-P-1002-01G
4	Remove load securing (12)	Only model 452.3
		 Pay attention to installation position.
		 Bolt, divider to body	*BA68.50-P-1001-03D
5	Remove screw (2) at trim (B-pillar) (3)	 Bolt, soft top to B-pillar	*BA77.30-P-1002-01C
6	Open soft top (6)
7	Remove side supports
8	Pull cover (7) towards front
9	Remove door seal (8) in area of trim (B-pillar) (3)
10	Remove clips at trim (B-pillar) (3) and remove trim (B-pillar) (3)
11	Pull carpet (4) towards front as far as rear panel	 Do not overextend carpet (4).
12	Remove bolt/bolts (5)	 Remove engine compartment cover carpet.
		 Bolt, soft top to body through engine compartment	*BA77.30-P-1001-01C
13	Disconnect connectors (9)
14	Pull line (10) towards front as far as rear panel
15	Remove covers and remove screws (11) located underneath	 Bolt, soft top to body through engine compartment	*BA77.30-P-1001-01C
16	Remove soft top (6) towards the inside
17	Install in the reverse order
18	Adjust soft top		AR77.30-P-1010RR

 Cargo retainer, divider

Number	Designation		Model 452.3
BA68.50-P-1001-03D	Bolt, divider to body	Nm	45

 Soft top

Number	Designation		Model 452.3/4
BA77.30-P-1001-01C	Bolt, soft top to body through engine compartment	Nm	10

 Soft top

Number	Designation		Model 452.3/4
BA77.30-P-1002-01C	Bolt, soft top to B-pillar	Nm	2

 Seat belts/emergency tensioning retractors

Number	Designation		Model 452.3/4
BA91.40-P-1002-01G	Bolt, upper seat belt guide bracket	Nm	30