129 589 03 21 00
Feeler gauge
S77.21-4535-09
Carefully handle prepared panoramic roof (1) and lay down.
Otherwise the adhesive surface can be soiled or the spacers glued to the panoramic roof (1) can fall off or slip.
Helper required.
1 | Guide prepared panoramic roof (1) over liftgate cutout into vehicle interior and put down. |
2 | Guide panoramic roof (1) through panoramic roof cutout toward outside and lay down on body flange. |
3 | Center panoramic roof (1) in lateral and longitudinal direction. |
To align, do not move panoramic roof (1) aid down, otherwise lift or reposition. |
4 | Mark installation position of aligned panoramic roof (1) with adhesive strips (2) as shown. |
5 | Cut adhesive strips (2) with knife. |
6 | Remove panoramic roof (1) upward, guide through panoramic roof cutout downward into vehicle interior and put down. |
7 | Remove panoramic roof (1) toward rear from vehicle and lay down on assembly stands with inside pointing upward. |