222 589 01 31 00
Set of shields
Helper required to cut out.
When cutting out, protect adjacent paint surfaces against damage using set of shields.
1 | Puncture adhesive bead on rear right corner of panoramic roof (1) with pull-in device (2) as shown and guide cutting wire into vehicle interior. |
S77.21-4530-01
S77.21-4531-09
2 | Cut adhesive bead starting at puncture point (a) in direction of arrow (arrow A) to center of panoramic roof. |
3 | Guide cutting wire to puncture point (a). |
4 | Cut adhesive bead starting at puncture point (a) in direction of arrow (arrow A) to center of panoramic roof. |
5 | Puncture adhesive bead on left right corner of panoramic roof (1) with pull-in device (2) as shown and guide cutting wire into vehicle interior. |
S77.21-4533-01
S77.21-4532-09
6 | Cut adhesive bead starting at puncture point (b) in direction of arrow (arrow C) to center of panoramic roof. |
7 | Guide back cutting wire to puncture point (b). |
8 | Cut adhesive bead starting at puncture point (b) in direction of arrow (arrow D) to center of panoramic roof. |