ar7721s0116e

Remove/install side cover panel for panoramic sliding sunroof

Typ ar · temat 77.21 · wersja 0100 · 2018-11-23

Dotyczy: Model 447.7/8, 448.8

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.21 Dach panoramiczny — Seria 447 (modele 7**, 8**) · Seria 448 (modele 8**)

EinPAS 38 System dachu › 38.15 Okno dachowe przesuwne/ panoramiczne okno dachowe przesuwne › 38.15.32 Roleta/ kaseta/ okładzina — Seria 447 (modele 7**, 8**) · Seria 448 (modele 8**)

AR77.21-S-0116E

Remove/install side cover panel for panoramic sliding sunroof

08.11.2018

Model

447.7/8, 448.8

Remove/install side cover panel for panoramic sliding sunroof

S77.21-A000-09

Shown on right cover panel (1)

1

Cover molding

2

Panoramic sliding sunroof

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Open panoramic sliding sunroof (2) approx. 5 cm.

2

Switch off ignition.

3

Starting from the rear, unclip left and/or right cover panel (1) from panoramic sliding sunroof (2) and remove.

Removal:
Carefully unclip cover panel (1) by hand.
Danger of breakage.

Installation: First position cover panel (1) with hook (arrow A) in opening (arrow B) at panoramic sliding sunroof (2).
Ensure cover panel (1) is correctly seated on panoramic sliding sunroof (2).

4

Install in the reverse order

Powiązane dokumenty