ar7721p0201mfb

Remove/install rear panoramic roof roller sun blind

Typ ar · temat 77.21 · wersja 0102 · 2019-10-07

Dotyczy: Model 247 with code 413 (Panoramic sliding sunroof/glass roof)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.21 Dach panoramiczny — Seria 247

EinPAS 38 System dachu › 38.16 Dach panoramiczny › 38.16.31 Roleta/ kaseta/ okładzina — Seria 247

AR77.21-P-0201MFB

Remove/install rear panoramic roof roller sun blind

04.10.2019

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

Remove/install rear panoramic roof roller sun blind

1

Roller sun blind

2

Screw

3

Guide rail

4

Drive cable guide tube

5

Bolts

P77.21-2519-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove headliner.

AR68.30-P-4300MFA

2

Remove screw/bolts (2) .

3

Remove roller sunblind (1) with guide rails (3) and take out of the vehicle.

Helper required.

4

Pull left and right drive cable guide tube (4) out of the guide rails (3).

When replacing roller sun blind (1).

5

Remove screws (5) and detach guide rails (3) from roller sunblind (1) (arrow).

When replacing roller sun blind (1).

6

Install in the reverse order.

Powiązane dokumenty