ar7721p0200mfb

Remove/install front panoramic roof roller sun blind

Typ ar · temat 77.21 · wersja 0102 · 2019-10-07

Dotyczy: Model 247 with code 413 (Panoramic sliding sunroof/glass roof)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.21 Dach panoramiczny — Seria 247

EinPAS 38 System dachu › 38.16 Dach panoramiczny › 38.16.31 Roleta/ kaseta/ okładzina — Seria 247

AR77.21-P-0200MFB

Remove/install front panoramic roof roller sun blind

04.10.2019

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

Remove/install front panoramic roof roller sun blind

P77.21-2518-09

Shown on right side of vehicle

1

Roller sun blind

4

Screw

2

Seal

5

Catch hook

3

Seal

6

Sliding shoe

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove sliding roof panel.

AR77.20-P-2854MFA

2

Detach seal (2) in the area of the roller sunblind (1) from the guide rail.

3

Detach seal (3) from the panorama roof frame.

4

Unscrew bolt (4).

5

Press catch hook (5) toward the front (arrow A) using a suitable tool, lift sliding shoe (6), (arrow B) and move out.

Installation:
Ensure that the sliding shoes (6) are seated correctly.
Otherwise, the function of the roller sunblind (1) is not ensured.

6

Remove roller sunblind (1).

7

Install in the reverse order.

Powiązane dokumenty