ar7721p0101mfb

Remove/install wind deflector for panoramic sliding sunroof

Typ ar · temat 77.21 · wersja 0103 · 2020-03-16

Dotyczy: Model 247 with code 413 (Panoramic sliding sunroof/glass roof)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.21 Dach panoramiczny — Seria 247

EinPAS 38 System dachu › 38.15 Okno dachowe przesuwne/ panoramiczne okno dachowe przesuwne › 38.15.33 Poszycie/pokrywa okna dachowego — Seria 247

AR77.21-P-0101MFB

Remove/install wind deflector for panoramic sliding sunroof

16.03.2020

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

Remove/install wind deflector for panoramic sliding sunroof

P77.21-A020-08

1

Wind deflector

3

Bearing

2

Catch hook

4

Retaining springs

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Completely open panoramic sliding sunroof.

2

Unhook left and right retaining spring (4) from the wind deflector (1) and from the panoramic sliding sunroof frame.

Installation: Observe installation position of retaining springs (4). Cutout (arrow) must be on side of wind deflector (1).

3

Release wind deflector (1) from the catch hooks (2) and remove toward the rear.

4

Position wind deflector (1) vertically, move out of the left and right bearing (3), and remove.

Check

5

Check bearings (3) for damage.

If the bearings (3) are damaged,

replace bearings (3).


AR77.21-P-0102MFB

6

Install in the reverse order.

Powiązane dokumenty