AR77.20-S-2511A | Removing and installing front sliding roof motor | 16.2.95 |
MODEL 638.1 /2 with CODE (D27) Glass sliding/pop-up roof (driver area)
S77.20-0500-06
1 A-pillar paneling
2 B-pillar paneling
3 Clip on A-pillar
4 Inner lining on sliding roof
5 Screws for lining on sliding roof
6 Grab handle
7 Dome lamp
8 Sun visors
9 Motor screws
M14 Motor
| Removal, installation | ||
1 | Remove headliner at front | ||
2 | Unscrew lining on sliding roof (4) with two screws (5) from inside and unclip | Lining can only be removed with sliding roof open | |
3 | Disconnect electrical connector on motor (M14) | ||
4 | Unscrew screws (4) on motor (M14) | | |
| |||
5 | Reinstall in opposite order |
Electric sliding roof
Number | Designation | Model 638 | |
BA77.20-N-1003-01A | Torx screw for electric drive on sliding/ | Nm | 2.5 |
000 589 01 10 00
Torx screw set