AR77.20-S-2500B | Remove/install wind deflector | 28.5.99 |
MODEL 638
with CODE (D24) Glass sliding/pop-up roof passenger compartment
with CODE (D27) Glass driver compartment sliding/pop-up roof
S77.20-0004-12
1 Wind deflector
2 Sliding/pop-up roof
3 Sliding roof paneling
4 Engine trim panel
5 Sun visor
6 Left sun visor guide rail
7 Right sun visor guide rail
8 Left glass roof guide rail
9 Right glass roof guide rail
10 Spacer
11 Bolt M5x20
12 5x20 plastic screw
13 5x14 plastic screw
14 O-Ring
S77.20-0009-01
1-28 5x14 plastic screw
Direction of travel
A Centering punch
B Roof centering
E 5x20 plastic screw
| Remove | ||
1 | Remove front headliner. | ||
2 | Remove right and left center luggage holder. | ||
3 | Remove sliding/pop-up roof glass cover | ||
4 | Unscrew one guide rail (6 or 7) from sun visor (5). | ||
5 | Move out sun visor (5). | ||
6 | Unscrew second guide rail (6 or 7) from sun visor (5). | ||
7 | Loosen screws (E). | Torx bit set | |
8 | Loosen screws (1-28). | Torx bit set | |
9 | Lift wind deflector (1) at front and remove. | ||
| Install | ||
10 | Install wind deflector (1). | Do not pinch sealing ring. | |
Clean body surface and seals. | |||
11 | Position screws (1-28) and tighten. | Observe tightening pattern (see figure). | |
| |||
Torx bit set | |||
12 | Tighten screws (E). | | |
Torx bit set | |||
13 | Screw on one guide rail (6 or 7) of sun visor (5). | ||
14 | Install sun visor (5). | ||
15 | Screw on second guide rail (6 or 7) of sun visor (5). | ||
16 | Install sliding/pop-up roof glass cover. | ||
| Leak test | ||
17 | Fasten water hose at front of sliding/pop-up roof (toward front of vehicle) and spray approx. 10 min. | In the event of leakage check assembly | |
18 | Install right and left center luggage holder. | ||
19 | Install front roof paneling | ||
| Inspecting | ||
20 | Perform function check |
Electric sliding roof
Torx bit set
000 589 01 10 00