AR77.20-P-3010H | Remove/install tilting/sliding roof motor | 7.12.06 |
MODEL 240.1 with CODE (418) Glass tilting/sliding roof in rear
P77.20-2416-07
1 Bolts
2 Wiring harness
M12 Tilting/sliding roof (SR [SHD]) drive unit
3 Bolt
4 Roof crossbeam
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. | Keep body parts and limbs well clear of moving parts. | |
1 | Close tilting/sliding roof | See Operator's Manual | |
2 | Remove front headliner | On vehicles with code (215a) Partition wall or with code (302) Partition wall with clear glass or with code (303) Partition wall with clear glass and curtain | |
On vehicles without code (215) Partition wall or without code (302) Partition wall with clear glass or without code (303) Partition wall with clear glass and curtain | |||
3 | Remove roof crossbeam paneling. | ||
4 | Unscrew bolts (3) and fold roof crossbeam (4) downward. | Allow roof crossbeam (4) to hang down on electric wiring harnesses. | |
5 | Expose electric wiring harness (2) | ||
6 | Unscrew bolts (1) from tilting/sliding roof (SR) drive unit (M12) | | |
7 | Remove tilting/sliding roof (SR) drive unit (M12) | ||
8 | Install in the reverse order | ||
9 | Perform teach-in run for sliding roof anti-pinch protection | ||
| Connect STAR DIAGNOSIS and read out fault memory |
Electric sliding roof
Powiązane dokumenty
- ad0000p200004a Podłączanie STAR DIAGNOSIS, odczytywanie pamięci usterek
- ad0000p200004a
- ar6830p7606ha
- ar6830p7607h
- ar6830p7607hb
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.