1 | Inner lock |
2 | Inner lock |
3 | Left rear door |
4 | Bolts |
5 | Cable |
6 | Rotary tumbler |
S72.20-4660-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove | ||
1 | Remove inner paneling from window frame on left rear-end door (3) |
| |
2 | Mark installation position of inner lock (1) | ||
3 | Remove inner lock (2) from left rear-end door (3) | ||
Detach inner lock (2) to remove inner lock (1). Do not remove cables from inner lock (2). | |||
4 | Remove screws (4) | ||
5 | Remove cable (5) from inner lock (1) | ||
| Install | ||
6 | Install cable (5) on inner lock (1) | ||
7 | Tighten inner lock (1) with bolts (4) | Observe markings. | |
8 | Install inner lock (2) on left rear-end door (3) | ||
9 | Install inner paneling on window frame on left rear-end door (3) |
| |
| Check | ||
10 | Close rotary tumbler (6) on inner lock (1) with suitable tool | ||
11 | Actuate inner lock (1) and check whether inner lock (1) opens and arrests correctly | ||
12 | Check whether inner lock (1) is seated correctly in lock striker and tighten bolts (4) | If it is necessary to correct the seat of the inner lock (1) in the lock striker: | |
| |||
Adjust inner lock (1) in relation to lock striker. | |||
Bolt, inner lock to rear-end door |
Powiązane dokumenty
- ar7220s4844e
- ar7220s6630e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.