1 | Electrical connector |
2 | Fuse |
3 | Guide rod |
4 | Screw |
M74 | Tailgate control drive unit |
S72.29-4536-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove | ||
1 | Remove rear right side paneling |
| |
Model 447.8 | |||
2 | Disconnect electrical connector (1) | ||
3 | Unlock retainer (2) and remove guide rod (3) from liftgate control drive unit (M74) | ||
4 | Unscrew bolts (4) and remove liftgate control drive unit (M74) | ||
| Install | ||
5 | Position liftgate control drive unit (M74) and tighten bolts (4) | Bolt, drive unit for power liftgate to body | |
6 | Connect electrical connector (1) | ||
7 | Adjust liftgate control drive unit (M74) by actuating liftgate open/close switch to "Liftgate open" position | When replacing tailgate control drive unit (M74). | |
8 | Install guide rod (3) on liftgate control drive unit (M74) and lock retainer (2) | ||
9 | Install rear right side paneling |
| |
Model 447.8 | |||
| Check | ||
10 | Check electric liftgate for proper function |
Powiązane dokumenty
- ar6830s1207e
- ar6830s4780e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.