ar7229p1101eq

Remove/install rear door control unit

Typ ar · temat 72.29 · wersja 0100 · 2020-03-04

Dotyczy: Model 253, 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.29 Instalacja elektryczna drzwi — Seria 253 · Seria 293

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.15 Sieć wymiany danych/wielofunkcyjne › 25.15.11 Moduł sterujący/ moduł/ przekaźnik — Seria 253 · Seria 293

AR72.29-P-1101EQ

Remove/install rear door control unit

18.02.2020

Model

253, 293

Remove/install rear door control unit

P72.29-A083-79

Shown on left rear door

1

Electrical connectors

N69/3

Left rear door control unit

N69/4

Right rear door control unit

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Remove door trim.

AR72.12-P-1010LW

2

Release and disconnect electrical connectors (1) of left rear door control unit (N69/3) and/or right rear door control unit (N69/4).

The number of electrical connectors (1) varies depending on the vehicle equipment.

3

Unclip and remove left rear door control unit (N69/3) and/or right rear door control unit (N69/4).

Installation: Ensure that catch hooks correctly insert into door module.

4

Install in the reverse order.

5

Perform commissioning of left rear door control unit (N69/3) and/or right rear door control unit (N69/4).

Only when replacing left rear door control unit (N69/3) and/or right rear door control unit (N69/4).

Model 253

AD00.00-P-2000-04B

Model 293

AD00.00-P-2000-06FR

Powiązane dokumenty